Browse all practice questions for the Electrical Comprehension DAA Practice Test. Search by topic, open any question and review its full explanation, then test yourself in the practice quiz.

Electrical Comprehension DAA Practice Test course image
More practice questions

These questions are part of the practice quiz. Start practicing

  • If the charge on a capacitor doubles while the voltage remains constant, what happens to capacitance?
  • In circuit diagrams, which symbol denotes a light emitting diode?
  • Ammeters measure current in which unit?
  • If a second lamp is added in parallel, what happens to the voltage across each lamp?
  • The ampere is defined as the flow of how much charge per second?
  • If one component in parallel circuit breaks, others still work?
  • True or false: A voltmeter is connected in parallel to measure voltage across a component.
  • Which formula expresses the relationship between capacitance, charge and voltage?
  • Why is the resistance of a long wire greater than a short wire?
  • If a lamp breaks or a component is disconnected in series, what happens?
  • Which term describes a single energy source such as a battery, solar panel, or power supply?
  • What device measures resistance?
  • Why might an ammeter show a lower reading than before when components are added in series, given current remains the same?
  • Which expression is given for the total charge transferred?
  • A subatomic particle that carries a negative electric charge is called what?
  • In a series circuit, the sum of the potential differences across all components equals the battery's total potential difference?
  • The changes in direction of current describe which type of current?
  • What electrical instrument measures voltage, also known as potential difference?
  • Which device temporarily breaks the circuit when opened?
  • Which statement about voltage in parallel circuits is true?
  • What do voltmeters measure?
  • Which diagram shows how the components are connected in a circuit?
  • In a series circuit, if the material connected is a conductor, what happens to the lights?
  • Which component blocks direct current and passes alternating current?
  • Which symbol represents an ohmmeter in circuit diagrams?
  • Which statement correctly describes LDRs with increasing light?
  • Which instrument measures current?
  • Which device is used to increase or decrease AC voltages by coupling two coils around an iron core?
  • In a series circuit with 50 Ω and 100 Ω resistors, voltages are in ratio 1:2; The voltage across 50 Ω is one third of the total supply?
  • Which device is commonly shown as a variable resistor to adjust brightness or speed?
  • Which symbol is used to denote a crystal oscillator on a schematic?
  • Which term is the voltage generated by a battery or a magnetic field?
  • Which instrument measures the potential difference across components?
  • Which law relates magnetic fields to the currents that produce them?
  • At a junction where two parallel branches meet, what happens to the currents from each branch?
  • What is the SI unit of electric charge?
  • In parallel circuits, for two lamps with different resistances, which lamp has higher current?
  • With a constant supply voltage, what happens to current when more components are added in series?
  • What are the units of current?
  • In a parallel circuit, total resistance changes when more components are added?
  • If you read the potential difference across a component, what quantity are you measuring?
  • Which instrument is used to measure potential difference across a component?
  • In a series circuit, the ammeter is connected in what location?
  • The voltage loss across part of a circuit due to impedance is called
  • Which shape is typical for most energy cells?
  • Which description best fits alternating current?
  • Which symbol represents a resistor in circuit diagrams?
  • If resistance increases while voltage remains constant, what happens to the current?
  • If current flows in one direction, which type of current is this?
  • What is the unit of charge?
  • Which statement best describes conductors and insulators?
  • Which statement correctly describes the charges of protons and electrons?
  • An _____ in a wire is a flow of electrons.
  • As more components are added in series, what happens to total resistance?
  • How can you measure the potential difference across a component?
  • Which symbol is used to denote a thermistor in circuit diagrams?
  • In parallel, each component experiences what relative to the cell?
  • The difference in energy between two parts of a circuit is called what?
  • Which example illustrates a series circuit?
  • Place in order from best to worst conductor: Silver, Aluminium, Copper
  • In a parallel circuit, the potential difference is the same across all branches?
  • What can be added to a parallel circuit to turn components on and off?
  • What term describes current that changes direction?
  • In circuit diagrams, which symbol denotes an ammeter?
  • What shows how electrical components are connected in a circuit?
  • The ratio of voltage to current in an alternating current circuit
  • Which device measures current?
  • What stays bright if you add more lamps in parallel?
  • What device is a transducer that converts energy into sound?
  • Which symbol represents a fuse in electrical diagrams?
  • A circuit for measuring an unknown resistance using a quadrilateral with three known resistors is called
  • If a conductor's cross-sectional area decreases, what happens to its resistance?
  • Which component is used to detect light levels, eg in automatic security lights?
  • How is the potential difference distributed among components in a series circuit?
  • What is the standard form of Ohm's law?
  • Which expression gives energy transferred by an electric circuit?
  • Which statement expresses Ohm's law?
  • Which statement correctly describes current using Ohm's law when voltage and resistance are known?
  • If a circuit has branches, it is classified as which type?
  • What is the voltage and frequency of the typical UK mains supply?
  • In a series circuit, what happens to total resistance if you add more components?
  • Increasing the plate area or decreasing the distance between plates results in
  • In a series circuit, what quantity is shared between components?
  • What is the charge of a neutron?
  • In a parallel circuit, if one branch has greater resistance than another, what happens to the current in that branch?
  • What is the circuit symbol for a battery?
  • Which component transfers energy through magnetic fields to change AC voltages?
  • Which term describes a material that can carry an electric current?
  • Which quantity remains constant through all components in a series circuit?
  • Which material has low resistance?
  • Which symbol is used to denote a bipolar transistor on a schematic?
  • Which component changes resistance with light levels?
  • In schematic diagrams, which symbol represents a protective device that melts when excessive current flows?
  • Also known as the potential difference or electromotive force, what term describes this quantity?
  • When additional parallel branches are added, what happens to the total current drawn from the cell?
  • Which term describes electronics that use continuous signals rather than discrete steps?
  • What is the unit used to measure electric current?
  • What happens when a fuse is subjected to a current above its rating?
  • The flow of current in a circuit can ______ when a component is not working, as less resistance for current to flow through.
  • In a series circuit with two identical resistors, how is the PD distributed across them?
  • What is the rate of flow of electric charge called?
  • The mathematical quantity used to define the effective magnitude of alternating current voltage or current is
  • LED is described as what?
  • In a parallel circuit, how does the total current relate to the branch currents?
  • If a branch has very high resistance compared to others, its current will be
  • Which symbol would you look for to identify a transformer in a schematic?
  • Which unit measures electric potential difference?
  • What is made up of two or more cells connected together?
  • What is the property that reduces the flow of charge through a circuit called?
  • An electrical component that stores charge, with unit of Farads, consisting of two plates separated by an insulating material
  • The ratio of voltage to current in an alternating current circuit is called
  • Which of the following is not an effect of an electrical current?
  • Which type of material would most easily allow current to flow?
  • What type of current is produced when electricity flows in a single direction, such as from batteries?
  • What is the equation for charge in terms of current and time?
  • In a parallel circuit, if components have different resistances, what is different between branches?
  • In a series circuit, the voltages across the components add up to the battery voltage?
  • Which electrical component only permits current to flow in one direction?
  • Which of the following statements about LDRs is true?
  • What do ammeters measure?
  • In a parallel circuit, adding more branches generally causes the total current to
  • What is the equation linking power and cost?
  • The inherent resistance present in all electrical materials is called
  • Which expression represents the power in terms of voltage and current?
  • Which instrument is used to measure potential difference?
  • As light level increases, what happens to the current through an LDR in a simple circuit?
  • What is the SI unit of capacitance?
  • If the total number of electrons equals the total number of protons, what is the overall charge of the atom?
  • Which of the following statements increases capacitance when the plate area is larger?
  • In circuits, which component is commonly used to limit current in an LED circuit?
  • Which statement about grounding a tanker during fueling is true?
  • Which supply contains more than one cell and provides the electrical charge of a circuit?
  • In circuit diagrams, which symbol indicates an open switch?
  • What is the unit of potential difference?
  • What is the safety device that melts when the current exceeds a specified value?
  • Which symbol represents a wattmeter in circuit diagrams?
  • Where can the ammeter be placed in a series circuit?
  • Which circuit has multiple paths for current to flow?
  • Which component is a two-terminal resistor used to control current and can adjust lamp brightness or speed?
  • Systems with a continuous variable signal are known as what?
  • The voltage generated by a battery or a magnetic field is called
  • Measures the opposition of a circuit which permits a current when voltages are applied.
  • In a series circuit, if the material connected is an insulator, what happens to the lights?
  • ____ stops flowing in the circuit because there is no longer a complete loop?
  • Which term describes any material that can carry an electrical current, and may also conduct heat?
  • Which component stores the electrical charge of a circuit and can be used for timing with a resistor?
  • What is the term for a temperature-dependent resistor used as a sensor in circuits?
  • Which subatomic particle orbits the nucleus and carries a negative electric charge?
  • In a three-pin plug, the earth pin is typically connected to which conductor color?
  • If electrons transfer 9 joules of energy per coulomb of charge, what is the potential difference?
  • What does the volt measure?
  • Which component stores energy in a magnetic field using a coil of wire?
  • Which component is used to control whether the circuit is complete by opening or closing the path?
  • In parallel, what is shared between components?
  • What is made by joining two or more cell symbols?
  • Which term describes the flow of electric charge in a circuit?
  • Which symbol represents a light dependent resistor in circuit diagrams?
  • The three components Ohm's law focuses on are
  • If a circuit has no branches, what type is it?
  • Which property makes thermistors suitable for temperature sensing?
  • If the voltage is constant and the current doubles, what happens to resistance?
  • What is the same in all parts of a series circuit?
  • What shape are most cells?
  • When a capacitor is fully charged, there is what?
  • Which symbol is used to denote a wattmeter on a schematic?
  • A transducer that converts temperature into resistance is called a what?
  • Which action describes why voltmeters are connected in parallel to measure voltage?
  • How is a voltmeter connected in a circuit, unlike an ammeter?
  • Which statement describes how you measure the potential difference of a cell or battery?
  • Which statement correctly describes alternating current (AC)?
  • In a simple DC circuit, which component is most likely to open-circuit when current exceeds its rating?
  • Direct current is described as current that flows in which direction?
  • Which metal is the best conductor among Silver, Copper, and Aluminium?
  • A 1 farad capacitor charged with 1 coulomb has potential difference of how many volts?
  • An output device that includes a coil of wire that creates a magnetic field when current passes through, often used to convert electrical energy into mechanical energy by pulling on something, is called what?
  • Which term describes a basic schematic showing how components are connected?
  • In a 50 Hz mains supply, how often does the current change direction per second?
  • What provides the potential difference needed to move charges in a circuit?
  • What happens to brightness when an extra lamp is added in series?
  • Why is an ammeter placed in series in a circuit?
  • In circuit diagrams, which symbol denotes a lamp?
  • The unit of capacitance is the farad. Which option correctly names the unit?
  • Which symbol represents a transformer in circuit diagrams?
  • What is the equation for charge in terms of current and time?
  • When two lamps are added in series, what happens to the total resistance?
  • Which instrument measures current and must be connected in series?
  • Which arrangement describes the correct method to measure the potential difference across a single resistor?
  • An ammeter reading in series may change as more components are added. Why?
  • Measures current. Some types have a pointer on the dial, most have a digital display.
  • What is the unit of resistance?
  • In a series circuit, identical resistors share PD equally?
  • What has a high resistance (a material)?
  • ____ can be added to a series circuit to turn components on and off.
  • The relationship between electric fields and magnets is described as what?
  • In a parallel circuit, what quantity is the same across each branch and equal to the source voltage?
  • Which symbol is commonly used to denote the ammeter in circuit diagrams?
  • Which statement correctly describes a battery?
  • At a low temperature, the resistance of a thermistor is?
  • What is potential difference commonly called?
  • Which safety device melts to interrupt excessive current?
  • Which device uses magnetic fields to transfer energy and adjust AC voltages?
  • A fuse that contains a metal strip that melts instantly on a short circuit is known as what?
  • What happens to the temperature of a resistor when an electrical current flows through it?
  • Adding components in series increases total resistance, meaning less current flows.
  • What unit is used for capacitance?
  • What happens to the total resistance of a circuit when multiple components are connected in parallel?
  • Connected in series, meaning it is connected in a loop with all the other components.
  • What is the voltage across each branch in a parallel circuit?
  • What is the formula for resistance?
  • To measure the potential difference across a cell, where are the voltmeter leads placed?
  • Which statement correctly represents Ohm's Law relating voltage, current, and resistance?
  • Which term describes a material that can carry an electric current and may also conduct heat?
  • Which statement best describes the relationship between branch currents and total current?
  • Which is an example of a parallel circuit?
  • What is the current when one coulomb flows past a point in one second?
  • What power is produced when a device has 1 volt across it and draws 1 amp of current?
  • In bright light, what happens to the resistance of an LDR?
  • Which term describes a single energy source such as a battery, solar panel, or power supply?
  • In a series circuit, what is shared between components?
  • What is the most likely reason a bulb does not light?
  • Which component is a single energy source in a circuit and can be combined with others to form a battery?
  • What term describes a device that provides electrical energy and can consist of multiple cells?
  • Which component acts as a temperature sensor?
  • Replacing a conductor with an insulator in a series circuit would likely result in what change to the current?
  • In electrical terms, what is a lamp?
  • A potential difference of one volt indicates energy transfer of how much per coulomb?
  • In a series circuit, if you add more resistors, the current decreases?
  • In circuit diagrams, which symbol denotes an inductor?
  • If you double the resistance of one branch in parallel, what happens to that branch's current?
  • What happens to the resistance of a thermistor as the temperature increases?
  • Which device allows current to flow by closing the circuit?
  • In a parallel circuit, what happens to the current at a junction where branches split?
  • Which statement correctly explains why longer wires have higher resistance?
  • The component that stores energy in a magnetic field when current flows through a coil is
  • In a cell symbol, which terminal is positive?
  • What term describes the rate at which electric charge flows?
  • What is another name for a light dependent resistor?
  • What increases when components are added in series?
  • Why does a thin wire have higher resistance than a thick wire?
  • What has the same value in a series circuit, no matter where ammeter goes?
  • Which wire color in a plug acts as a safety earth conductor?
  • At a high temperature, the resistance of a thermistor is?
  • Which term describes a collection of two or more cells used to provide electrical energy?
  • The component that supplies electrical charge in a circuit, and when multiple cells are used, the group is called a battery?
  • Thermistors are commonly used as what type of sensor?
  • What is the total current flowing from the power source in a parallel circuit?
  • Which statement is true about the relationship between the source current and the branch currents in a parallel circuit?
  • Current in the different branches of a parallel circuit is described as
  • In a parallel circuit, the current through a branch is determined primarily by which property of that branch?
  • What happens to the resistance of LDRs as light intensity rises?
  • What does a transformer do to electrical currents?
  • If one lamp in a parallel circuit burns out, what happens to the other lamps?
  • Named because they resemble the 'eddies' in a stream. Currents flow in loops within a conductor, strongest at the surface
  • What happens to the resistance of a light dependent resistor as the light level increases?
  • In a series circuit, what is the relationship of current through each component?
  • Which symbol denotes a heater?
  • When refuelling an aeroplane, to avoid sparks from static electricity, what is done?
  • Why does an oil tanker connect a metal wire to the ground when transferring fuel?
  • In a series circuit with resistors 50 Ω and 100 Ω, the voltages across the resistors are in what ratio?
  • In a parallel circuit, what is different across all branches?
  • Which device is used to detect light levels in automatic lighting systems in many circuits?
  • If you add another branch in parallel, how does the total current drawn from the cell typically change?
  • Adding more lamps in series will have what effect on total resistance?
  • Current flows within electromagnetism. Which law illustrates how magnetic fields are powered by electrical currents?
  • When current reaches a junction in a parallel circuit, how does it move?
  • Which component provides the energy for electrical devices to function?
  • What term describes a basic schematic showing how components are connected?
  • Which symbol represents an inductor?
  • A battery is formed by combining several of these small energy sources. What are they?
  • Which device converts electrical energy into heat?
  • If a component is disconnected in a series circuit, what happens to the current?
  • What term describes a material that acts as a very poor conductor of electricity?
  • In a car, the lamp on the dashboard is typically used to indicate what?
  • What is defined as the energy transferred per unit charge between two points in a circuit?
  • In a circuit where lamps are connected in series, why do they become dimmer when more are added?
  • The larger the area of plates or the smaller the distance between each plate, the what happens to the capacitance?
  • Which symbol represents a crystal oscillator?
  • In a parallel circuit, if one branch breaks, current continues in the remaining branches?
  • Which instrument is used to measure current in a circuit?
  • When two parallel branches reconnect at a node after flowing through the branches, the currents combine to form what?
  • What quantity is measured by a voltmeter?
  • The energy transfer equation E = I x V x T uses which quantities?
  • When more branches are added in parallel, what happens to total current drawn from the source?
  • Which component prevents current from flowing through a circuit when opened?
  • In a series circuit, which quantity remains the same across every component?
  • Which component stores energy and is commonly used in timing circuits with resistors?
  • What is the formula for capacitance?
  • A current in a conducting material which results from induction by moving or varying the magnetic field, causing energy loss in iron cores, is called what?
  • Which statement best describes how current behaves in a parallel circuit when branches are present?
  • In a parallel circuit, the current in a branch is determined primarily by which property of that branch?
  • If you double the voltage across a fixed resistor, what happens to the current?
  • A thermistor is a sensor device; it converts temperature changes into changes in what electrical property?
  • What is the main purpose of insulating material on electrical wires?
Subscribe

Get the latest from Passetra

You can unsubscribe at any time. Read our privacy policy